INFO

SIP Provider SFR (FR) (kb4887)

The information in this article applies to:

  • SwyxWare 2015

[ Summary | Information | Links ]


Summary

Information und configuration hints for SIP provider SFR (France).


Information

General information

A SIP trunk from SFR (FR) can only be used in combination with an internet access from SFR. The customer network therfore usually is within the SFR network.

The SIP communication between the SFR SIP proxies and the SwyxWare has to be established through port 5060. Since the SwyxWare per default uses port 65002 to communicate with a SIP provider, it is necessary to install the appropriate service (LinkMgr) on a separated server and to change the SIP port accordingly.

SFR (FR) is offering registerless SIP trunks. This means that the authentication is based on the public IP address of the LinkMgr server. Therefore, you need a static, public IP address from SFR assigned to the LinkMgr server.

SFR is operating with a number of different servers. Therefore it is not possible to preconfigure the Proxy Server in the "SIP" tab of the Trunkgroup Properties dialog. In this field, please enter the IP address that SFR has named you.

Configuration

For your convenience the generated CustomProviderProfiles.config is available for download at the end of this article. Extended information about how to use this file can be found at Configuration and Adaptation of SIP Providers via Provider Profiles (kb3436).

Important: From SwyxWare2015R5 on, the provider profile for SFR (FR) is available in the list of provider profiles and the CustomProviderProfiles.config is no longer necessary.

During creation of the SIP Trunkgroup, the profile 'SFR (FR)' has to be selected.

For additional information, it is possible to download a configuration guide at the end of this article.

Tested Features

  • Incoming/outgoing national calls
  • Correct Calling Line Identification (CLI) on national
  • CLIP No Screening
  • Holding and retrieving calls
  • Toggeling between two calls
  • Call transfer
  • Conferencing
  • Mutually supported codecs:
    • G.711a
    • G.729
    • T.38 for FAX negotiation
  • Incoming/outgoing DTMF signaling in accordance with via RFC2833
  • T.38 Negotiation and FAX transmission

Test date:
20/12/2016 with SwyxWare2015R40.0

Overview of tested SIP provider


Links

As far as software supplied or used by us, includes open source elements the additional terms under https://www.swyx.com/open-source apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under https://www.swyx.com/open-source.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.