INFO

SIP Provider Drei (AT) (kb4911)

The information in this article applies to:

  • SwyxWare 2015

[ Summary | Information | Links ]


Summary

Information und configuration hints for SIP provider Drei (Austria).


Information

General information

IP Directions is offering a registerless SIP trunk. This means that the authentication is based on the public IP address of the SwyxWare server. Therefore, you need a static, public IP address from your ISP assigned to the SwyxWare server.

The actual interoperability tests were executed by Swyx Partner Data-Way, not by the Swyx TAP.

Configuration

For Drei, it is necessary to create two different Trunkgroups with the two different profiles "Drei-1 (AT) 2013R4" and "Drei-2 (AT) 2013R4" . During configuration of the actual SIP Trunk, the available number range is assigned to both SIP Trunks.

For your convenience the generated CustomProviderProfiles.config is available for download at the end of this article. Extended information about how to use this file can be found at Configuration and Adaptation of SIP Providers via Provider Profiles (kb3436).

 
Important: From SwyxWare2015R40.2, the provider profile for Drei (AT) is available in the list of provider profiles and the CustomProviderProfiles.config is no longer necessary.

Tested Features

  • Incoming/outgoing national calls
  • Incoming/outgoing international calls
  • Correct Calling Line Identification (CLI) on national and international calls
  • CLIP No Screening
  • Holding and retrieving calls
  • Toggeling between two calls
  • Call transfer
  • Conferencing
  • Mutually supported codecs:
    • G.711a
    • G.711u
    • T.38 for FAX negotiation
  • Incoming/outgoing DTMF signaling via SIP INFO

Restrictions
None

Test date:
14/11/2016 with SwyxWare2015R30.5

Overview of tested SIP provider


Links

As far as software supplied or used by us, includes open source elements the additional terms under https://www.swyx.com/open-source apply in addition. An overview which products from the Swyx portfolio include open source elements and which open source license is relevant can be found under https://www.swyx.com/open-source.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.


Comment

Comment on this article



If we have any follow-up questions, where can we contact you?

E-Mail Address (optional)


Note

This feedback form can't be used for support requests. Those requests must be directed to your Swyx reseller or distributor.